. 
Hill Country Research
Innovations in Telecommunication and Automation

 

Broken Tool Detector MSA-1

Typical Installations
 

| back | home |
CNC machines:


 
 
 

Non CNC machines (US version):




       Installation:

1.        install interrupter relay (1CR)
2.        locate motor contactor (1M) and loop motor contactor supply line through NC contact of interrupter relais
3.        wire tool sensor to input switch* (1LS), interrupter relay (1CR), +24V and ground
4.        test run... ready
 

*  limit switch on cam shaft of machine
 
 


Non CNC machines (int.version):


 
 

| back | home |